Wheel Replacement
To reduce risk of shock or
accidental startup, always
disconnect machine from
power before adjustments,
maintenance, or service.
Worn or damaged wheels are easily replaceable.
Tool Needed
Hex Wrench 5mm .............................................. 1
-24-
To replace worn out or damaged wheel:
1.
DISCONNECT MACHINE FROM POWER!
2.
Remove (4) cap screws retaining wheel
(Figure 24).
Qty
Figure 24. Wheel cap screws.
3.
Remove and replace wheel.
4.
Re-install (4) cap screws and tighten in
alternating pattern.
Model G1095/G1096 (Mfd. Since 8/15)
Cap
Screw