Schematic, Electrical Up5 5-15Hp Sd 3Ph 50Hz - Ingersoll-Rand SSR UP5-4 Operation And Maintenance Manual

OPeRATIOn AnD MAInTenAnCe MAnUAL
SCHeMATIC, eLeCTRICAL UP5 5–15HP SD 3PH 50Hz
KeY
1SV Valve, solenoid (nc)
CR Relay, control
CR-1 Contact, control relay
CS Customer supplied 20v / 1 / 50hz
DM Motor, dryer
DO Dryer option
EDV Valve, electric drain
HATS Switch, high air temperature
HM Hourmeter
HM1 Indicator, maintenance
MM Motor, compressor
P Switch, pressure
ES Switch, emergency stop
FU1, FU2 Fuse, primary
FU Fuse, secondary
FU, FU5 Fuse, dryer
KM1 Contactor, main
KM-1,2, Contacts, auxiliary. Main contactor
KM2 Contactor, delta
http://air.ingersollrand.com
KM2-1,2 Contacts, auxiliary. Delta contactor
KM Contactor, star
KM-1,2 Contacts, auxiliary. Star contactor
LT1 Light, power on indicator (green)
LT2 Light, auto restart indicator (white)
MIO Indicator, maintenance option
(Instead of standard hourmeter)
MOL Overload, main motor
MOL-1 Contact, main motor overload
ST Push button, start
T1 Transformer, control
TM1 Relay, delta starting (10sec)
TM1-1 Relay, delay off, contact
nOTeS
1. (*) Furnished, mounted and wired outside of
control panel, if required by order.
2. Circuit shown in normal position de–energized.
. All wiring to be marked in accordance with this
schematic.
. All wiring to be in accordance with NEC.
GeneRAL InFORMATIOn
1