Table of Contents
Advertisement
Synchronizing with a DAW or External MIDI Device
By transmitting and receiving MIDI messages, the
VE-500 can synchronize with a computer or an external
MIDI device. For example, you can switch VE-500
patches from an external MIDI device or DAW, or match
the tempo.
If the VE-500 is connected via USB to a computer, you
can also use dedicated software to do the following.
5 Edit patch settings.
5 Rename patches.
5 Change the order of patches, or replace them.
5 Back up patches and internal settings, or restore the
backed-up settings.
5 View the "Parameter Guide" and "MIDI Implementation
Chart" (PDF).
Connection example
MIDI messages that can be
transmitted and received
Patch change
Bank select (CC#0, #32) and program change
Synchronization data
Tempo clock (F8)
Patch data
System Exclusive messages
Other messages
Note
Control changes
18
DAW
External MIDI device
* Control change transmission and reception are
specified by the ASSIGN settings. In addition to
receiving control changes, the VE-500 can also
transmit them when you operate a switch or the
EXP pedal.
For details on the parameter, refer to
the "Parameter Guide" (PDF file).
Installing the USB Driver
You must install the USB driver before
connecting to a computer.
Please download the USB driver from the BOSS
website.
Install this special driver before making a USB
connection.
Download the USB driver from the BOSS website.
For details, refer to Readme.htm which is included
in the download.
&https://www.boss.info/support/
The program you need to use, and the steps you
need to take to install the USB driver will differ
depending on your computer setup, so please
carefully read and refer to the Readme.htm file
that comes with the download.
Installing the Dedicated Software
You can easily download dedicated software from
the BOSS website.
& https://www.boss.info/support/
For details on how to use the software, refer to the
Readme.htm file that comes with the download.
Hide quick links:
Advertisement
Table of Contents
