Appendix; Error Messages; Attaching The Rubber Feet; Main Specifications - Boss VE-500 Owner's Manual

Appendix

Error Messages

Display
SENDING BULK DATA
RECEIVING BULK DATA
MIDI OFFLINE
MIDI BUFFER FULL
USB CONNECTED
USB OFFLINE
KNOB IS LOCKED
MEMORY DAMAGED!

Attaching the Rubber Feet

Main Specifications

BOSS VE-500: Vocal Performer
Power Supply AC Adaptor
Current Draw 310 mA (with phantom power)
170 (W) x 138 (D) x 62 (H) mm
Dimensions
6-3/4 (W) x 5-7/16 (D) x 2-1/2 (H) inches
Weight 860 g
Display Graphic LCD (132 x 32 dots, backlit LCD)
Accessories AC adaptor: PSA series, Owner's manual, Leaflet "USING THE UNIT SAFELY, " Rubber Feet x 4
Footswitch: FS-5U, FS-5L
Options
Dual Footswitch: FS-6, FS-7
(sold separately)
Expression Pedal: FV-500H, FV-500L, EV-30, Roland EV-5
* 0 dBu = 0.775 Vrms
* This document explains the specifications of the product at the time that the document was issued. For the latest
information, refer to the Roland website.
Problem
Currently transmitting a MIDI bulk dump.
Currently receiving a MIDI bulk dump.
Communication from the connected device
has been interrupted. This message is also
displayed if the connected device is powered-
off. This is not a malfunction.
An excessive amount of MIDI data was received
in a short time from an external MIDI device
connected to the MIDI IN connector, and the
VE-500 was unable to process it.
The USB cable is connected.
Communication from the connected device
has been interrupted. This message is also
displayed if the connected device is powered-
off. This is not a malfunction.
The buttons and knobs are locked.
User memory is damaged.
You can attach the rubber feet (included) if necessary.
* When turning the unit over, be careful so as to protect the buttons and knobs from damage.
Also, handle the unit carefully; do not drop it.
* Attach the rubber feet correctly. If they are not attached correctly, they could deform or
malfunction.
Action
-
-
Check whether the connection cable
might be disconnected or broken.
Reduce the amount of MIDI data that is
being sent to the VE-500.
-
Check whether the connection cable
might be disconnected or broken.
Turn off the lock function.
Execute the factory reset operation
(p. 17). If this does not solve the
problem, a malfunction might have
occurred. Consult the nearest Roland
service center.
210 mA (without phantom power)
1 lb 15 oz
19