Day/Night - Samsung SCC-4235(P) User Manual

To select [RET], press UP key on the top block or press DOWN
key on the bottom block and then press ENTER key to return a
upper menu.
In order to set the motion detection area on your own, you have
to specify the size and location for the area setting. When [ON]
is selected in [DISPLAY], the detected motion is displayed on the
screen and the camera sends the Alarm Out signal. You can also
assign the sensitivity for motion detection.
Note
※ MOTION DET menu is not available for the first 5 seconds after
operating the PAN/TILT/ZOOM/FOCUS/IRIS functions.
※ Since the motion detecting function depends on the brightness
of selected area, it may dysfunction due to the different
brightness between the background and object.

DAY/NIGHT

❚
The [DAY/NIGHT] menu is used to configure the day and night
related settings for this camera. This camera can turn the IR
(Infrared) filter on or off.
2
CAMERA.ID..
IRIS..
SHUTTER..
AGC..
WHITE.BAL..
FOCUS.MODE..
MOTION.DET..

DAY/NIGHT..

PRIVACY..
SPECIAL..
PRESET..
EXIT..
OFF
ALC...
OFF
HIGH
ATW2
AF
OFF
DAY...
OFF
...
...
QUIT