Advertisement
INSTALLATION
(1) Find an appropriate location for installation (Illustration 1).
(2) Drill holes according to the size of U-bracket as illustration 3 and fix the U-bracket as illustration 2.
(Illustration 1)
(3) Drill a
20mm next to the U-bracket (Illustration 2).
(4) Fix the camera to the U-bracket (illustration 4).
(Illustration 3)
(5) Connect the camera tail and the DC Power cable inside the car (Illustration 5).
DC Power Cable
(6) Loosen the screw between the camera and the fixed U-bracket and adjust the camera to a best viewing angle (Illustration 6).
Camera
U-bracket
(Illustration 5)
Vehicle Body
Angle of the Lens
20 hole
(Illustration 2)
Camera
(Illustration 4)
Camera Tail
Rubber Grommet
Monitor Image
Back of Vehicle Body
Illustration 6
Hex head screw (stainless steel)
Washer (stainless steel)
Washer (nylon)
Bumper
7/17
Advertisement
