Jcm Tool Suite Standard Edition; Firmware Download Procedure; Figure 6-10 Jcm Tool Suite Short-Cut Icon; Figure 6-11 Jcm Tool Suite Standard Edition - JCM GLOBAL UBA-RC Series Operation And Maintenance Manual

Performance Tests

JCM Tool Suite Standard Edition

When the "
JCM Tool Suite Standard Edition
installed, the Short-cut Icon shown in Figure 6-10
will appear on the PC Desktop.

Figure 6-10 JCM Tool Suite Short-cut Icon

Figure 6-10 JCM Tool Suite Short-cut Icon
To activate the "
JCM Tool Suite Standard Edi-
" Software Program, double-click on the Short-
tion
cut Icon. The "
JCM Tool Suite Standard Edition
Screen shown in Figure 6-11 will appear on the PC
Monitor.
The
Device Information
6-11a list the Model Information whenever the
Device is connected to a PC.
The Pull-down Menu shown in Fig-
Service Mode
ure 6-11b contains several functional selections.
The selection items will appear depending on the
specific DIP Switches set to create them

Figure 6-11 JCM Tool Suite Standard Edition

a
NOTE: Service Mode Pull-down Menu listings will depend on
DIP Switch Setting selections.
Figure 6-11 JCM Tool Suite Standard Edition

Firmware Download Procedure

To download the UBA-RC
follows:
1. Copy the UBA-RC
on the PC Desktop. (Review Figure 6-1 "Tool and
Harness Connection" on page 6-1 to properly
select and set-up the Cable connections).
2. Turn the UBA-RC
3. Set UBA Transport Unit's 8-Position DIP
™
Switches #6, #7 and #8 to
ure 6-13 a).

Figure 6-12 UBA-RC DIP Switch Setting

Figure 6-12 UBA-RC DIP Switch Setting
4. Connect the UBA-RC
the recommended USB Cable.
P/N 960-100928R_Rev. 3 {EDP #192692}
UBA-RC™ Series Banknote Recycler
" is
text fields shown in Figure
.
b
Firmware, proceed as
™
Firmware File and paste it
™
Power Supply .
OFF
™
(Figure 6-12 & Fig-
ON
ON
and the PC together using
™

Figure 6-13 DIP Switch Location

a
Figure 6-13 DIP Switch Location
5. Turn the UBA-RC
UBA Transport Unit LED will begin alternately
™
"
flashing at a Green
UBA-RC Status will revert to Stand-by Mode.
™
6. Launch the "
JCMToolSuiteStandardEdition.exe
Program.
7. When the "
JCM Tool Suite Standard Edition
Screen shown in Figure 6-14 appears, click on the
Service Mode Pull-down Menu and select "
" (See Figure 6-14 a).
load

Figure 6-14 Select Download

Figure 6-14 Select Download
8. The "
JCM Downloader Suite Edition Ver X.XX
Program will activate automatically.
NOTE: When the download program
is activated for the first time, an
"Invalid File!" message pop-up
Dialog Box (Figure 6-15) will appear
because the Firmware File has not
yet been selected. Click on the
Dialog's "
6-15 a), and select the proper
Firmware File. Once the Firmware
File is selected, the message will no
longer appear again.

Figure 6-15 Invalid File! Dialog Pop-Up Screen

Figure 6-15 Invalid File! Dialog Pop-Up Screen
9. When the communication line between the UBA-
RC and the PC is connected, "
™
appear in Green
Download Screen Button.
Click on the "
Button (Figure 6-16 b).
© 2018, JAPAN CASH MACHINE CO., LTD.
6 - 3
Power Supply . The
ON
™
and Red Color Rate, and the
" Screen Button (Figure
OK
" will
Online
Text (Figure 6-16 a) below the
Screen 
"
Browse
Section 6
"
"
Down-
a
"
a