NOSHOK 810 series User Manual page 7

Function of the buttons:
Function of the buttons:
S1 to run through the menu points,
S1 to run through the menu points,
to change the value
to change the value
S2 to select menu point,
S2 to select menu point,
to return to the menu point
to return to the menu point
= These steps are available
= These steps are available
on switches configured with
on switches configured with
the Enchanced Software
the Enchanced Software
Option Only.
Option Only.
*The parameters which are marked with a *
*The parameters which are marked with a *
can only be changed if the user is authorized in
can only be changed if the user is authorized in
the set-up menu (CO.En). Otherwise, there will
the set-up menu (CO.En). Otherwise, there will
be only the display of the selected values in this
be only the display of the selected values in this
menu.
menu.
Q u i c k P r o g r a m m i n g - U s e r M e n u
Q u i c k P r o g r a m m i n g - U s e r M e n u
Return to the beginning of the user menu by pressing the button S1.
Return to the beginning of the user menu by pressing the button S1.
Only for the version with two switching points!
Only for the version with two switching points!
Only for the version with two switching points!
Only for the version with two switching points!
6
6
6
Enter the quick programming user
Enter the quick programming user
menu by pressing the buttons
menu by pressing the buttons
S1 + S2 for less than 3s.
S1 + S2 for less than 3s.
Select the unit.
Select the unit.
Valid for all further settings.
Valid for all further settings.
Select the first switching point*
Select the first switching point*
Select the first reset point*
Select the first reset point*
Select the second switching point*
Select the second switching point*
Select the second reset point*
Select the second reset point*
The minimum pressure value stored is
The minimum pressure value stored is
deleted if the button S1 is pressed for
deleted if the button S1 is pressed for
longer than 3s. The display flashes and
longer than 3s. The display flashes and
the actual pressure value is stored.*
the actual pressure value is stored.*
The maximum pressure value stored is
The maximum pressure value stored is
deleted if the button S1 is pressed for
deleted if the button S1 is pressed for
longer than 3s. The display flashes and
longer than 3s. The display flashes and
the actual pressure value is stored.*
the actual pressure value is stored.*
Save the previous changes
Save the previous changes
YES: Save
YES: Save
NO: Not Save
NO: Not Save
Returns to the actual pressure indication
Returns to the actual pressure indication
afterwards.
afterwards.