Technical Data - NOSHOK 810 series User Manual

Technical Data

Configuration
Pressure connection
Setting
Materials
• Measuring component
• Pressure connection
• Housing
Load change
Power Requirement
Power consumption
Outputs
Switch outputs
• Quantity
• Function
• Switching current
• Setting
- Switching point
Pressure, positive or negative
¼" NPT standard, other connections available on request
Menu-guided programming using control buttons
Adjustable switching points, switchback points,
switching function
Programmable pressure units: bar, psi
Stainless steel, ceramic with NBR seal at less than 1500 psi (standard)
Stainless steel
Stainless steel, plastic display electronics for 800 Series;
Black Anodized Aluminum for 810 Series
>
10 million pressure cycles
12... 30 VDC
≤
50 mA, without load current
2 switch outputs, programmable
1 programmable switch output and
1 programmable analog output
1 or 2 to N or P potential
Normally open contact (NO) or normally closed contact (NC),
programmable
0.5 A
Via display with control buttons
1 to 100% of full scale
10
10