Default Configuration - Analog Devices ADuCM4050 EZ-KIT Manual

• USB 2.0 Cable (For Power and USB communication)
• J-Link Lite Emulator Package
• J-Link Lite emulator
• 20 Pin flat cable
• USB 2.0 Cable
Contact the vendor where you purchased your ADuCM4050 EZ-KIT or contact Analog Devices, Inc. if any item is
missing.

Default Configuration

The ADuCM4050 EZ-KIT board is designed to run as a standalone unit.
The Default Hardware Setup figure shows the default settings for jumpers and switches and the location of the
jumpers, switches, connectors, and LEDs. Confirm that your board is in the default configuration before using the
board.
®
ADuCM4050 EZ-KIT Manual
Default Configuration
2–3