Samsung BL1050 User Manual page 91

FAQ
When the DirectX 9.0c or later is not installed
Install the DirectX 9.0c or later
1) Insert the CD provided with the camera
2) Run the windows explorer and select the [CD-ROM drive:\
DirectX] folder and click the DXSETUP.exe file.
The DirectX will be installed. Visit the following site for
downloading the DirectX.http://www.microsoft.com/directx
If a PC connected with the camera stops responding while
Windows is starting.
In this case, disconnect the PC and the camera and Windows
will start. If the problem happens continuously, set the Legacy
USB Support to disable and re-start the PC. The Legacy USB
Support is in the BIOS setup menu. (The BIOS setup menu
differs from the PC manufacturers and some BIOS menus don'
t have Legacy USB Support) If you can't change the menu by
yourself, contact to the PC manufacturer or BIOS manufacturer.
If the movie clip can't be deleted, or the removable disk can't be
extracted or an error message displays during the file transfer.
If you install only the Samsung Master, the problems
mentioned above occasionally happen.
- Close the Samsung Master program by clicking the Samsung
Master icon on the Taskbar.
- Install all the application programs included in the software CD.
90
Samsung Eco-mark
It is Samsung's own symbol mark is used to effectively
communicate Samsung's environmental friendly product
activities to the consumers. The mark represents Samsung'
s continuous effort on development of environmental
conscious products.