File Name; Imprinting The Recording Date - Samsung BL1050 User Manual

Settings ( )

File name

This function allows the user to select the fi le naming format.
[Reset] : After using the reset function,
the next fi le name will be set
from 0001 even after formatting,
deleting all or inserting a new
memory card.
[Series] : New fi les are named using
numbers that follow the previous
sequence, even when a new
memory card is used, or after formatting, or after deleting
all pictures.
- The fi rst stored folder name is 100SSCAM, and the fi rst fi le name
is SDC10001.
- File names are assigned sequentially from SDC10001
SDC10002 ~ SDC19999.
- The folder number is assigned sequentially from 100 to 999 as
follows: 100SSCAM 101SSCAM
- Maximum numbers of fi les in a folder are 9999.
- The fi les used with the memory card conform to the DCF (Design
rule for Camera File systems) format. If you change the image fi le
name, the image may not play back.
SETTINGS
Format
Reset
Reset
File
Imprint Series
Power Off
Video Out
Back OK Set
~ 999SSCAM.

Imprinting the recording date

There is an option to include DATE / TIME on still images.
- Sub menus
[Off] : The DATE & TIME will
not be imprinted on the
image fi le.
[Date] : Only the DATE will be
imprinted on the image
fi le.
[Date&Time] : The DATE & TIME will be
imprinted on the image fi le.
The Date & Time are imprinted at the bottom right side of the still
image.
The imprint function is applied only to still images.
Depending on the manufacturer and print mode, the date printed
on an image may not be printed correctly.
SETTINGS
Format
Reset
File
Off
Imprint
Date
Power Off
Date&Time
Video Out
Back OK Set
47