Using The Camera Buttons To Set The Camera; Power Button; Shutter Button; Zoom W / T Button - Samsung BL1050 User Manual

Using the camera buttons to set the camera

The recording mode function can be set up by using the camera buttons.

POWER button

Used for turning the camera's power on / off.
If there is no operation during the specifi ed
time, the camera's power will be turned
off automatically to save battery life. Refer
to page 48 for more information about the
auto power off function.

SHUTTER button

Used for taking an image or recording voice in the RECORDING
mode.
In MOVIE CLIP mode
Pressing the shutter button down fully
starts the process for recording a movie
clip. Press the shutter button once and
the movie clip is recorded for as long
as the available recording time in the
memory allows. If you wish to stop recording, press the shutter
button again.
In STILL IMAGE mode
Pressing the shutter button down halfway activates the autofocus
and checks the condition of the fl ash. Pressing the shutter button
down fully takes and stores the image. If you select voice memo
recording, the recording will start after the camera has fi nished
storing the image data.
22

ZOOM W / T button

If the menu is not displayed, this button
works as the OPTICAL ZOOM or DIGITAL
ZOOM button.
This camera has a 5X optical zoom and a
5X digital zoom function. Using both will
offer a total zoom ratio of 25X.
TELE Zoom
Optical zoom TELE : Pressing the ZOOM T button. This will
zoom into the subject i.e. the subject will
appear nearer.
Digital zoom TELE : When the maximum (5X) optical zoom
is selected, pressing the ZOOM T button
activates the digital zoom software.
Releasing ZOOM T button stops the
digital zooming at the required setting.
Once the maximum digital zoom (5X) is
achieved, pressing the ZOOM T button
will have no effect.
Pressing
the ZOOM
T button
[WIDE zoom]
Pressing
the ZOOM
T button
[TELE zoom] [Digital zoom 5.0X]