Auto Power Off; Selecting Video Out Type - Samsung BL1050 User Manual

Settings ( )

Auto power off

This function switches the camera off after a set amount of time in
order to prevent unnecessary battery drainage.
- Sub menus
[Off] : The power off function
will not operate.
[1, 3, 5, 10 min] : The power will turn
off automatically if not
used for the period of
time specifi ed.
- After replacing the battery, the power off setting will be
preserved.
- Note that the automatic power off function will not operate if the
camera is in the PC / Printer mode, slide show, playing back a
voice recording and playing back a movie clip.
48

Selecting Video out type

SETTINGS
Format
Reset
Off
File 1 min
3 min
Imprint
Power Off 5 min
Video Out 10 min
Back OK Set
The Movie output signal from the camera can be NTSC or PAL.
Your choice of output will be governed by the type of device (monitor
or TV, etc.) to which the camera is connected. PAL mode can
support only BDGHI.
Connecting to an external monitor
When the camera is connected to an
external monitor, the image and menus
on the LCD monitor will be visible on
the external monitor and the LCD
monitor of the camera.
SETTINGS
Format
Reset
File
Imprint
Power Off NTSC
Video Out PAL
Back OK Set
Yellow - Video
White - sound