Start Up Image; Lcd Brightness; Quick View; Lcd Save - Samsung BL1050 User Manual

Display ( )

Start up image

You can select the image that is fi rst displayed on the LCD monitor
whenever the camera is turned on.
- Sub menus : [Off], [LOGO], [User Image]
- Use a saved image for the start-up image
with the [Start Image] in the [RESIZE]
menu in the play mode.
- The start-up image will not be deleted by
[Delete] or [Format] menu.
- The User images will be deleted by
[Reset] menu.

LCD brightness

You can adjust the LCD brightness.
- Sub menus : [Auto], [Dark],
[Normal], [Bright]

Quick view

DISPLAY
Language
Date&Time
Start Image
Off
LCD Bright
Quick View

LCD Save

Back OK Set
LCD save
DISPLAY
Language
Date&Time
Start Image Auto
LCD Bright Dark
Quick View Normal
LCD Save Bright
Back OK Set
If you enable Quick View before capturing an image, you can view the
image you just captured on the LCD monitor for the duration set in the
[Quick View] setup. Quick view is possible only with still images.
- Sub menus
[Off] : The quick view function
can't be activated.
[0.5, 1, 3 sec] : The captured image is
briefl y displayed during
the selected time.
If you set the [LCD save] to On and the camera isn't operated during
the specifi ed time, the LCD monitor will be turned off automatically.
- Sub menus
[Off] : The LCD monitor will not be
turned off.
[On] : If the camera isn't operated
during the specifi ed time (about
30 SEC.), the camera power will
be idle (Camera status lamp:
Blinking) automatically.
DISPLAY
Language
Date&Time
Start Image Off
0.5 sec
LCD Bright
Quick View
1 sec
LCD Save 3 sec
Back OK Set
DISPLAY
Language
Date&Time
Start Image
LCD Bright
Quick View Off
LCD Save On
Back OK Set
45