Connecting To A Power Source; Using The Batteries - Samsung Digimax A502 User Manual

Connecting to a Power Source

Using the batteries

[ Inserting the AA type battery ] [ Inserting the CR-V3 type battery ]
■ There are 3 indicators for battery condition that are displayed on the LCD monitor.
Battery indicator
Battery status
《14》
: If the camera does not turn on after you have inserted batteries,
please check whether the batteries are inserted with the correct
polarity (+/ -).
1. Open the battery chamber cover by pushing in the direction of the
arrow.
3. To close the battery chamber cover, push it until it clicks.
The batteries are fully
charged
2. Insert the batteries taking note of the
polarity (+/ -).
Prepare new batteries
There is no battery capacity.
Replace with new batteries.