Button - Samsung Digimax A502 User Manual

+/- button

■ You can use the +/- button to adjust the values for the white balance, ISO, exposure
compensation, shutter speed and aperture value.
Main menu
WHITE BALANCE
Exposure compensation
ISO
Aperture value
Shutter speed
■ White balance : The white balance control allows you to adjust the colours to appear more
natural looking.
● Selecting a White Balance
1. Press the +/- button, and then use the UP and DOWN
buttons to select the white balance icon (
The white balance menu bar will appear as shown.
2. Use the LEFT and RIGHT buttons to set the white
balance to the desired value. The value you set will be
displayed on the LCD monitor.
AUTO
DAYLIGHT
CLOUDY
SUNSET
FLUORESCENT H
FLUORESCENT L
TUNGSTEN
CUSTOM
Different lighting conditions may cause a colour cast on your images.
3. Press the +/- button again. The value you set will be saved and White Balance setup mode
will end.
《30》
Sub menu
AUTO, DAYLIGHT, CLOUDY, SUNSET, FLUORESCENT H,
FLUORESCENT L, TUNGSTEN, CUSTOM.
-2.0 ~ 0.0 ~ +2.0 (0.5EV steps)
AUTO, 100, 200, 400
Shutter speed : 8 ~ 1/1,000 Sec.
Aperture value : F 3.5 / F 7.0
: The camera automatically
selects the appropriate white balance settings, depending on
the prevailing lighting conditions.
: For taking images outside.
: For taking images under a cloudy and overcast sky.
: For taking images at sunset.
: For shooting under daylight fluorescent types of three-way
fluorescent lighting.
: Shooting under white fluorescent lighting.
: For shooting under tungsten (standard light bulb) lighting.
: Allows the user to set the white balance according to the
shooting condition.
).
Available camera mode