Starting The Slide Show - Samsung Digimax A502 User Manual

Starting the slide show

■ Images can be displayed continuously at pre-set intervals.
1. Press the play mode button and press the menu button.
2. Press the LEFT/ RIGHT button and select the [SLIDE]
menu tab.
● Setting play interval: Set the slide show play interval.
1. Use the Up/ Down buttons to select the [INTERVAL]
menu and press the Right button.
2. Use the Up/ Down buttons to select the desired interval.
3. Press the OK button to save the configuration.
● Repeat setting : Repeat or not the slide show after finishing the first cycle.
1. Use the Up/ Down buttons to select the [REPEAT] menu and press the Right button.
2. Use the Up/ Down buttons to select the desired sub menu.
[OFF] Selected : The slide show is closed after one cycle.
[ON] selected : The slide show is repeated until cancelled.
3. Press the OK button to save the configuration.
● Start the slide show: The slide show can start only in the [START] menu.
1. Use the Up/ Down buttons to select the [START] menu.
2. Press the OK button to start the slide show.
- Press the Pause button to pause the slide show.
- Press the Pause button (
- Press the Menu button to stop the slide show.
INFORMATION
● The loading time depends on the image size and quality.
● While the slide show is playing, only the first frame of a movie file is displayed.
In case of a voice file, the voice recording icon will appear.
) again to resume the slide show.
◀
2048
SLIDE
INTERVAL 1 SEC
REPEAT ON
START
EXIT:MENU MOVE:
《55》
▶
▲
▼