Table of Contents
Advertisement
Introduction
WARNING: Read all safety warnings and all
instructions. Failure to follow the warnings
and instructions may result in electric shock,
fire and/or serious injury.
General power tool safety warnings
Check before starting
•
Inspect the working area. Remove all loose objects,
such as stones, broken glass, nails, steel wire, string
etc. that could be thrown out.
•
Always remove the battery to prevent the machine
being started by accident. Always disconnect the
battery before any maintenance on the machine.
•
Before using the machine and after any impact,
check for signs of wear or damage and repair as
necessary.
•
Only use original spare parts.
•
The machine operator must ensure that no people or
animals come closer than 15 metres while working.
When several operators are working in the same
area the safety distance should be at least 15
metres.
•
Do an overall inspection of the machine before use,
see maintenance schedule.
•
National or local regulations may regulate the use.
Comply to given regulations
Personal safety
•
Stay alert, watch what you are doing and use
common sense when operating a power tool. Do
not use a power tool while you are tired or under
the influence of drugs, alcohol or medication. A
moment of inattention while operating power tools
may result in serious personal injury.
•
Keep bystanders away.
•
This appliance is not intended for use by person
(including children) with reduced physical, sensory or
mental capabilities, or lack of experience and
knowledge, unless they have been given supervision
or instruction concerning use of the appliance by a
person responsible for their safety. Children should
be supervised to ensure that they do not play with
the appliance.
•
Never allow children or other persons not trained in
the use of the machine and/or the battery to use or
service it. Local laws may regulate the age of the
user.
•
Keep unauthorised persons at a distance. Children,
animals, onlookers and helpers should be kept
outside the safety zone of 15 m (50 ft.). Stop the
machine immediately if anyone approaches.
•
Store the equipment in a lockable area so that it is
out of reach of children and unauthorized persons.
4
•
Dress properly. Do not wear loose clothing or
jewellery. Keep your hair, clothing and gloves
away from moving parts. Loose clothes, jewellery
or long hair can be caught in moving parts.
•
Never use the machine if you are tired, if you have
drunk alcohol, or if you are taking medication that
could affect your vision, your judgement or your
coordination.
•
Wear personal protective equipment. See
instructions under the heading "Personal protective
equipment".
•
Always remove the battery when passing the
machine to another person.
•
Keep in mind that it is you, the operator that is
responsible for not exposing people or their property
to accidents or hazards.
Power tool use and care
•
Never use a machine that has been modified in any
way from its original specification. Never use the
machine near explosive or flammable materials.
•
Never use a machine that is faulty. Carry out the
safety checks, maintenance and service instructions
described in this manual. Some maintenance and
service measures must be carried out by trained and
qualified specialists. See instructions under the
heading Maintenance.
•
Only use original spare parts.
•
Always ensure that ventilation openings are kept
clear of debris.
•
All covers, guards and handles must be fitted before
starting.
•
Only use the machine in daylight or in other well-lit
conditions.
•
Never use the machine in bad weather, for instance
in fog, in rain, damp or in wet locations, strong
winds, intense cold, risk of lightning, etc. Extremely
hot weather may cause overheating of the machine.
Operation in bad weather is tiring and can lead to
dangerous conditions, for instance slippery surfaces.
•
If the machine starts vibrating abnormally, stop the
machine and remove the battery.
•
Walk, never run.
General safety instructions
WARNING: Read the warning instructions
that follow before you use the product.
•
Incorrect or careless use of the product can turn it
into a dangerous tool that can cause serious or even
fatal injury to the operator or others. You must read
and understand the contents of this operator's
manual.
•
Under no circumstances may the design of the
product be modified without the permission of the
manufacturer. Never use a product that has been
modified in any way from its original specification
788 - 002 -
Hide quick links:
Advertisement
Table of Contents
