Schweitzer Engineering Laboratories SEL-3022 Instruction Manual page 41

Cryptographic Manual—Do Not Copy
Installation 2.15
Initializing the SEL-3022
Preliminary Copy
Wireless Configuration
A wireless card is required to perform in-system settings modifications, monitoring,
and to establish a virtual serial port connection. The SEL-3022 complies with the IEEE
802.11b Wireless Standard. Suitable wireless cards and associated software drivers can
be found at your local computer or office supply store.
Follow the 802.11b manufacturer's installation procedure (for either the PC Wireless
Card or a PDA) to install the wireless card.
After the wireless card is installed, you must enable Wired Equivalence Protocol
(WEP—see Appendix C: Wireless Operator Interface Security for details). Open the
802.11b wireless driver and locate the security settings. Enter all WEP keys, including
the active WEP key. The WEP keys on your PC or PDA must match the WEP keys the
SEL-5809 Settings Software loaded during SEL-3022 initialization.
Instruction Manual SEL-3022 Transceiver
Date Code 20050615