Advertisement
Technical data
Bemærk: I særligt udsatte maskiner anbefales der beskyttelse med en skærm.
Beachte: In besonders ausgesetzten Maschinen wird Schutz in Form von
elektrischer Abschirmung empfohlen.
NB: In particularly exposed applications, protection by screen is recommended.
Remarque: Pour les applications particulièrement exposées, il est recommandé
d'installer une protection par écran.
© Danfoss, 2015-09
Følgende tekniske data bygger på typiske testresultater. Der anvendes mineralsk olie med en
viskositet på 21 mm
/s [102 SUS] og en temperatur på 50°C [122°F].
2
The following technical data are from typical test results. For the hydraulic system a mineral based
hydraulic oil with a viscosity of 21 mm
Folgende technische Daten bauen auf typische Testergebnisse. Es wurde Mineralöl mit einer
Viskosität von 21 mm
/s [102 SUS] und einer Temperatur von 50°C [122°F] verwendet.
2
Les caractéristiques techniques suivantes sont tirées de résultats de tests typiques. Pour le
système hydraulique, on a utilisé une huile minérale d'une viscosité de 21 mm
température de 50°C [122°F].
PVEO
Supply voltage U
DC
Current consumption at rated voltage
Power consumption
PVE-CI
Supply voltage U
DC
Current consumption at rated voltage
Power consumption
Oil consumption
PVEA, PVEA-F
Supply voltage U
DC
Current consumption at rated voltage
Signal voltage
Signal current at rated voltage
Input impedance in relation to 0.5 • U
Input capacitor
Power consumption
Oil viscosity
range
12 – 75 mm
[65 – 347 SUS]
Oil
min.
4 mm
/s [39 SUS]
viscosity
2
max.
460 mm
/s [2128 SUS]
2
Bemærk: Maksimum opstartsviskositet
Note: Max. start up viscosity 2500 mm
Beachte: Maximale Viskosität bei Inbetriebnahme
Remarque : Viscosité maximale au démarrage 2500 mm
Filtering in the hydraulic system
Required
18/16/13
operating
(ISO 4406, 1999 version)
cleanliness level
L1216285 • Rev BC • Sep 2015
/s [102 SUS] and a temperature of 50°C [122°F] were used.
2
rated
range
max. ripple
rated
range
ripple
Neutral
Full flow steady state
Peak
rated / range
max. ripple
PVEA - neutral
PVEA - A-port ↔ B-port 0.25 • U
DC
Oil temperature
/s
2
Oil
temperature
Operating temperature
Ambient
/s
2
Stock
Recommended long
/s
2
time storage in
packaging
Pilot pressure
Pilot pressure
(relative to T
pressure)
Grade of enclosure*
Connector version
Deutsch
* According to the international standard IEC 529.
/s [102 SUS] et à une
2
12 V
24 V
DC
DC
11 to 15 V
22 to 30 V
DC
DC
5%
320 mA @ 12 V
365 mA @ 24 V
DC
4 W
11 to 32 V
DC
11 to 32 V
DC
maximum 5%
320 mA @ 12 V
170mA @ 24 V
DC
0.5 W
0.04 l/min
1 l/min
1.3 l/min
11 V to 32 V
5%
320 mA @ 12 V
170 mA @ 24 V
DC
0.5 x U
DC
to 0.75 • U
DC
DC
0.25 mA to 0.70 mA
12 KΩ
100 uF
3.5 W
range
30 – 60˚C [86 – 140˚F]
min.
-30˚C [-22˚F]
max.
90˚C [194˚F]
-30 – 60˚C [-22 – 140˚F]
-40 – 90˚C [-40 – 194˚F]
10 – 30˚C [50 – 86˚F]
nom.
13.5 bar [196 psi]
min.
10 bar [145 psi]
max.
15 bar [217 psi]
IP 67
DC
DC
DC
3
Advertisement
