Mounting To A Panel/Surface - For Use With Cable Connections - Iridium 9601 User Manual

Short burst data only transceiver

Hide thumbs Also See for 9601:

Table of Contents

3.2.2 Mounting to a Panel/Surface – For use with cable connections

An example of mounting to a panel or other surface design is shown in Figure 6.

Figure 6: 9601 SBD Transceiver mounted to a plate or surface.

The figures and tables below provide mechanical information design information for a mounting a 9601 to

a plate or surface configuration

Item Numbers in Figure 7 are described in Table 4. (Not to scale. Dimensions in millimeters.)

Notes for Figure 7:

1. Item 1 includes 4 off M3 x 20 shipping screws, shake-proof washers and nuts

2. Shipping screws can be used to attach Transceiver to panel of 2.00 mm maximum thickness

3. Panels thicker than 2.00mm require longer screws to be e.g. M3 x 25mm

4. See Figure 8 for mounting hole dimensions

Figure 7: Assembly Item Number Identification.

Table of Contents