Related Manuals for Champion 54P Series
Summary of Contents for Champion 54P Series
- Page 1 Operating Instructions & Service Manual “CONCORD” RECLINER Operating Instructions and Service Manual ALL “POWER” RECLINERS 1-800-998-5018 www.championchair.com 1-800-998-5018 www.championchair.com...
-
Page 2: Table Of Contents
CONTENTS ITEM PAGE Contents In-Service Information Special notes Chair capacity information Power requirements Receiving new chairs New chair inspection To report damage Return authorization Storage Disposal of equipment and accessories Technical description Product Labels In-service procedures Operating instructions 11-12 General set up Cautions and warnings Handset Reclining the chair... -
Page 3: In-Service Information
In-Service Information It is very important to Champion that our customers review all the materials in the in- service package they receive. By reviewing the in-service materials provided, you increase the useful life of the products by helping to prevent their improper use, which may lead to premature damage and wear. -
Page 4: Special Notes
WELCOME Champion Manufacturing Inc. would like to thank you for selecting our products. We take great care in making certain that our products leave the factory in flawless condition. Our products are properly packaged to arrive in that same condition. -
Page 5: Chair Capacity Information
CHAIR CAPACITY INFORMATION STANDARD RECLINERS: 54P, 59P, 65P, 67P, 85P, 87P, and 89P series: 300 lbs. BARIATRIC RECLINERS: 56P, 58P, 66P, 68P, 86P, and 88P series: 500 lbs. OM00PWR Power Recliner Manual REV 1 010118... -
Page 6: Power Requirements
Running battery to low power will cause damage. Battery Specifications: If the battery needs to be replaced part number BA1802-0200-000 must be used. Champion’s Customer Service must be contacted at 800-998-5018 to obtain a replacement part. Follow local governing ordinances and recycling plans regarding disposal of battery. DO NOT dispose of the battery packs in household waste. -
Page 7: Receiving New Chairs
2. Call Champion’s customer service immediately to report the damage: 800-998-5018. 3. All claims must be filed by the consignee and reported to Champion Manufacturing Inc. within 5 days of receipt of the shipment. -
Page 8: Disposal Of Equipment And Accessories
The Champion Power Recliner uses a linear actuator to drive the recline mechanism inside the chair. The Champion Power Recliner can be positioned from full upright to full recline with the use of the handset. The trendelenburg function (optional) is not controlled by the power function. -
Page 9: Product Labels
PRODUCT LABELS Serial Number: Foam: Load Capacity (300/500 lb) Swing Arm Latch: (65, 66, 67, 68, 85, 86, 87, 88, & 89 series only) CATB117 Rating: (Only where required) CATB133 Rating: (Only where required) OM00PWR Power Recliner Manual REV 1 010118... - Page 10 LA-PJM Name plate label (Only where required) Cleaning / Trend: Cleaning Trend Protective Earth Ground: Alternating Current / Direct Current: Do not Oil or Grease Keep Dry Attention: Consider Accompanying Documents Double Insulation NOTE: Labels are not shown to actual size. OM00PWR Power Recliner Manual REV 1 010118...
-
Page 11: In-Service Procedures
Before chairs are put into service, all personnel should view the Champion in-service CD (if applicable) and read the operating instructions section of the manual, which is also on this CD Pay special attention to the hang tag attached to the handle, or chair back. -
Page 12: Operating Instructions
OPERATING INSTRUCTIONS General Set up: 1. Uncoil the power cable from the back side of the power recliner and plug it into a properly grounded outlet. Please see the power requirements in the chair specifications section of this manual. 2. To fully charge the battery for the first time, the chair must be plugged in for 10 hours. The battery is charging whenever the chair is plugged in. -
Page 13: Cautions And Warnings
OPERATING INSTRUCTIONS CAUTION: Please keep hands, all other body parts and equipment away from moving parts that can cause pinch points. Do not reach to the inside of the chair unless the chair is unplugged from the outlet and the battery, if present, is disconnected to avoid injury if the chair position is changed. -
Page 14: Handset
HANDSET The positioning of the Champion power recliner is controlled by the handset shown below. The handset allows total occupant control of the chair reclining function with the touch of a button. The power recliner can be positioned from full upright to full recline and any position in between to maximize comfort. -
Page 15: Power Connections
POWER CONNECTIONS Guide Pin Slot Cable Lock Clips Control Actuator Cable Handset Cable Battery Cable 2 extra fuses in here Power Cable Clip Remove Cables: Remove the cable lock. This may require a small screwdriver to undo the clips on the control box. -
Page 16: Trendelenburg Option
TRENDELENBURG OPTION We recommend that health care professionals who will be using this chair become thoroughly acquainted with the recliner and the trendelenburg option prior to its use with a occupant. CAUTION: The remote on your power chair will not operate the recline function if trend is engaged. -
Page 17: Operation Of The Swing Arms (If Equipped)
OPERATION OF THE SWING ARMS (IF EQUIPPED) WARNING: Your recliner has moving parts that create pinch points. When the swing arms are open, those points are fully exposed. Occupants should NEVER be left in a chair with the arms in the opened position. THE CHAIR SHOULD NOT BE LEFT UNATTENDED, WITH THE ARMS UNLATCHED. -
Page 18: Proper Use Of Foot Tray
PROPER USE OF FOOT TRAY The foot tray is a feature available on many Champion recliner models. The foot tray is useful as an assist for occupants getting into or out of the recliner, re-positioning in the recliner, and as a foot support while sitting fully upright or being transported in the recliner. -
Page 19: Chair Options And Accessories
Refer to the in-service DVD for operating instructions and appropriate section of this manual. Accessories are features that may be ordered for your Champion chairs at any time. Some installation may be required. Accessories can be installed in the factory or in the field by the facility. -
Page 20: Use Of Iv Pole
TO INSERT: PLACE IV POLE OVER CENTER, PUSH INTO POSITION IN OPENING AND TURN TO LOCK TO REMOVE: HOLD BASE IN POSITION WITH FOOT TWIST TO UNLOCK LIFT IV POLE TO REMOVE Note: Some components may have a different appearance than shown in the picture due to multiple models of chairs. -
Page 21: Optional Features - Central Locking Casters
OPTIONAL FEATURES – Central Locking Casters Your chair can be ordered with the Central Locking Caster system. If your chair was ordered this way, your caster lock looks like the photo below. To lock step on the green side of the pedal and to unlock step on the red side of the pedal. -
Page 22: General Cleaning Precautions
If you have any questions, please call Champion’s Customer Service Department at 800-998-5018 with the serial number from your chair. The serial number can be found on the frame base, on the back, to the left hand side. -
Page 23: General Cleaning - Plastic Table Tops
This would include all COM (Customers Own Material) or Custom vinyls. If you do not know what vinyl your recliner is upholstered in, call Champion’s Customer Service 800-998-5018 with the serial number of your chair to obtain assistance. -
Page 24: Warranty Procedure
Warranty Coverage Your coverage is per the Champion warranty. A copy of the current warranty was provided with this manual for your convenience. Please read this document. Warranty Does Not Apply If: ●... -
Page 25: Service Information
If you have questions or problems, you should never hesitate to call for assistance: 800-998-5018. The most timely and cost effective way for your chair to be repaired is for the Champion’s customer service department to work with your maintenance department or equipment technician. -
Page 26: Service Parts Form
P.O. & SN number. Email:_____________________________________ Model number: _________________________ Serial number: _________________ Part number Page no. / part no. Quantity Champion Manufacturing Inc. 2601 Industrial Parkway Elkhart, IN 46516 Phone: 800-998-5018 fax: 574-293-5760 (25) OM00PWR Power Recliner Manual REV 1 010118... -
Page 27: Medical Recliner Schematics
MEDICAL RECLINER TRANSPORTER INTERNAL LATCH SYSTEM Note: Some components may have a different appearance than shown in the picture due to multiple models of chairs. The serial number of the chair informs Customer Service of the proper components for that chair. (26) OM00PWR Power Recliner Manual REV 1 010118... -
Page 28: Back Assembly And Mechanism
Note: Some components may have a different appearance than shown in the picture due to multiple models of chairs. The serial number of the chair informs Customer Service of the proper components for that chair. (27) OM00PWR Power Recliner Manual REV 1 010118... -
Page 29: Back Frame, Foot Tray, Casters
Note: Some components may have a different appearance than shown in the picture due to multiple models of chairs. The serial number of the chair informs Customer Service of the proper components for that chair. (28) OM00PWR Power Recliner Manual REV 1 010118... -
Page 30: Power Recliner
POWER RECLINER NOTE: Some components may have a different appearance than shown in the picture due to multiple models of chairs. The serial number of the chair informs Customer Service of the proper components for that chair. (29) OM00PWR Power Recliner Manual REV 1 010118... -
Page 31: Parts Listing
MEDICAL RECLINER-TRANSPORTER PG-PART# DESCRIPTION PG-PART# DESCRIPTION 26-01 MECHANISM W/ ALL UPHOLSTERED 26-39 SNAP CAP RECEIVER PARTS ATTACHED-for illustration 26-40 #6 X 32 NYLON LOCK NUT purposes only 26-02 LEFT HAND SWING ARM ASM. 26-41 LATCH 26-03 MECHANISM LATCH 26-42 LATCH ASM. MOUNT 26-04 858 SERIES FRAME BASE 26-43... - Page 32 MEDICAL RECLINER-TRANSPORTER MEDICAL RECLINER-TRANSPORTER PG-PART# DESCRIPTION PG-PART# DESCRIPTION 28-01 1 / 4 X 2 0 X 1 HEX BOLT 29-01 POWER FRAME BASE 28-02 1/4 FLAT WASHER 29-02 CONTROL BOX MOUNT 28-03 1/4 X 20 REVERSE LOCK NUT 29-03 ¼-20 LOCK NUT 28-04 1 / 4 X 2 0 X 1 1/4 HEX BOLT 29-04...