Trendelenburg Option - Champion 54P Series Operating Instructions And Service Manual

We recommend that health care professionals who will be using this chair become thoroughly
acquainted with the recliner and the trendelenburg option prior to its use with a occupant.
CAUTION: The remote on your power chair will not operate the recline function if
trend is engaged.
CAUTION: The Trendelenburg release must be fully actuated and held for the chair
to operate properly.
To actuate the trendelenburg option:
1. Follow the operating instructions to place the chair in a full recline position.
2. Locate the trendelenburg actuator release lever on the chair back.
3. Grasp the push handle, "pull and hold" the trendelenburg release lever. Lower the chair
and occupant to the trendelenburg position. Release the actuator to lock the chair back in
position. Should you choose to place the chair in a position short of full trendelenburg,
stop the chair back at the desired position and release the actuator while in motion.
4. Once the chair back has started to lower, a safety limit switch will be activated and the
motor of the chair will NOT function. This is a safety feature to prevent damage to the
chair.
To return from trendelenburg option:
1. "Pull and hold" the trendelenburg actuator release lever as you lift the chair back to the
"TV position".
2. With the back all the way out of trendelenburg the safety limit switch will be released and
motor function will resume as described above.
3. The chair may now be moved into any of the standard chair positions according to the
operating instructions.
NOTE: If the remote does not function after bringing the chair out of
trendelenburg redo the process for returning from trendelenburg to make sure
the back is all the way up.

TRENDELENBURG OPTION

Release the actuator to lock the back in position.
(15)
OM00PWR Power Recliner Manual REV 1 010118