Silvercrest SKT 2000 B1 Operating Instructions Manual page 9

GB
■
IE
CY
■
■
■
■
■
■
■
■
■
■
■
■
■
6
All repairs must be carried out by authorised specialist com-
panies or by the Customer Service department. Improper
repairs can pose significant risks to the user. It will also invali-
date any warranty claims.
Defective components must always be replaced with genuine
replacement parts. Only by using genuine replacement parts
can it be assured that the safety requirements are being com-
plied with.
Protect the appliance from penetration by moisture and liquids.
Always unplug the appliance from the mains power socket
before cleaning.
Always disconnect the power cable from the mains power
socket by pulling on the plug; never pull on the cable.
Avoid using extension cables.
Do not use the appliance in the vicinity of naked flames.
The appliance must not be placed immediately under or over
a mains power socket.
Do not use this heater together with a programmable switch,
a timer, a separate remote control system or any other system
which switches the heater on automatically, as this could lead
to a fire risk if the heater is covered or set up incorrectly.
Disconnect the plug from the mains power socket if the appli-
ance malfunctions and also during thunderstorms.
The appliance must not be used in the immediate vicinity of
a bath, a shower or a swimming pool.
The appliance is to be installed so that a person in the bath
or shower is unable to touch the switch and other controls.
Do not expose the appliance to spray and/or dripping water
and do not place any objects filled with liquid, such as vases
or open drink containers, on or near the appliance.
WARNING: This heater is not equipped with a device to
control the room temperature. Do not use this heater in small
rooms when they are occupied by persons not capable of
leaving the room on their own, unless constant supervision is
provided.
SKT 2000 B1