GSM-PRO2
11 Other messages
11.1 Module reset
Reset with the following command: wreset. This performs a full module reset. The module answers with the
power cycle message if set.
11.2 Stop messaging
The command: mesoff will stop the module from sending any more messages.
The module answers: 'messaging turned off'.
To turn back on the messaging send: meson.
The module answers: 'messaging turned on'.
11.3 Show all SMS commands
Send help to receive a list with all commands. See chapter 10 for an overview.
11.4 Location
When a module is equipped with GPS send an SMS: location to receive a link to Google maps with a pinpoint to
the module.
- 30 -
Need help?
Do you have a question about the GSM-PRO2 and is the answer not in the manual?
Questions and answers