Memorizing The Channels; Selecting The Video Signal-Source - Samsung CL25M5MQ Owner's Instructions Manual

O

Memorizing the Channels

Your TV can memorize and store all of the available channels for both "off-air" (antenna)
and cable channels. After the available channels are memorized, use the CH
CH
nels by entering the channel digits. There are three steps for memorizing channels:
selecting a broadcast source, memorizing the channels (automatic) and adding and delet-
ing channels (manual).

Selecting the Video Signal-source

Before your television can begin memorizing the available channels, you must specify the
type of signal source that is connected to the TV (i.e., an antenna or a cable system).
1
Press the MENU button to
display the menu.
Press the L or M button to
select "Channel", then
press the ENTER button
2
Press the L or M button
to select "Air/CATV".
3
Repeatedly press the
œ œ or √ √ button to cycle
through these choices:
"Air" (antenna) "STD",
"HRC" or "IRC" (all cable
TV)
Press the EXIT button to
exit.
Note: STD, HRC and IRC identify various types of cable
TV systems. Contact your local cable company to identify
the type of cable system that exists in your particular area.
At this point the signal source has been selected. Proceed
to "Storing Channels in Memory" (next page).
24
P E R AT I O N
buttons to scan through the channels. This eliminates the need to change chan-
Channel
Auto Program
Add/Delete : Deleted
Air/CATV : Air
Name : ----
Move Enter Return
Channel
Auto Program
Add/Delete : Deleted
Air/CATV : Air
Name : ----
Move Adjust Return
Channel
Auto Program
Add/Delete : Deleted
Air/CATV : STD
Name : ----
Move Adjust Return
√ √
√ √
√ √
√ √
√ √
√ √
and