Memorizing The Channels; Selecting The Video Signal-Source - Samsung TXL2091F Owner's Instructions Manual

O
P E R AT I O N

Memorizing the Channels

Your TV can memorize and store all of the available channels for both "off-air" (antenna)
and cable channels. After the available channels are memorized, use the CH
CH
nels by entering the channel digits. There are three steps for memorizing channels:
selecting a broadcast source, memorizing the channels (automatic) and adding and
deleting channels (manual).

Selecting the Video Signal-source

Before your television can begin memorizing the available channels, you must specify
the type of signal source that is connected to the TV (i.e., an antenna or a cable system).
1
Press the MENU button to
display the menu.
2
Press the CH
two times to select
"Channel."
3
Press the VOL + button.
The first line of the menu
is selected.
4
Repeatedly press the VOL
+ button to cycle through
these choices:
ANT (antenna) STD, HRC
or IRC (all cable TV).
Note: STD, HRC and IRC identify various types of cable TV systems. Contact your local cable
company to identify the type of cable system that exists in your particular area.
At this point the signal source has been selected. Proceed to "Storing Channels in Memory"
(next page).
3.5
C T : TV O
HAPTER HREE PERATION
buttons to scan through the channels. This eliminates the need to change chan-
button
and