Samsung CL25M5MQ Owner's Instructions Manual page 15

I
N S TA L L AT I O N
3
Connect a coaxial cable
between the ANTENNA
OUT terminal on the
VCR and the antenna
terminal on the TV.
A coaxial cable is usually included with a VCR. (If not, check your local electronics store).
4
Connect a set of audio
cables between the
AUDIO OUT jacks on the
VCR and the AUDIO
jacks on the TV.
5
Connect a video cable
between the VIDEO OUT
jack on the VCR and the
VIDEO jack on the TV.
Follow the instructions in "Viewing an External Signal Source" to view your VCR tape.
Note: This figure shows the Standard connector-jack panel. The actual configuration for
your TV may be different.
VCR Rear Panel
Coaxial Cable
VCR Rear Panel
VCR Rear Panel
Video Cable
TV Rear Panel
TV Rear Panel
Audio Cable
TV Rear Panel
15