ABB RER615 Installation Manual page 39

1MRS757799 C
REC615 and RER615
Installation Manual
A070592 V5 EN
Figure 19: Wall mounted protection relay
A 214 mm
B 177 mm
C 270 mm
Minimum of 50 mm space is needed between two kits.
When connecting the wires, a wall-mounted protection relay can be pulled out and
turned 45° (or 90°) degrees downwards or upwards.
• To release the protection relay for pulling it out, push the locks beside the
mounting frame.
• To rotate the protection relay, loosen the knurled-head screws in the rails.
A
B
C
Section 4
Mounting
31