Table of Contents
Advertisement
Optional Heater Block Details
Temperature probe holes (all models)
1/8" NPT
1/16" NPT
Liquid trace ports
G004, G015
G045, G105
G240 (Qty 2)
Electric Cartridge requirements
G004
G015
G045
G105
G240 (Qty 2)
Contact for Refurbishment
& Calibration Services
The G-Series is not designed for user repair and all such work should be done at the factory or under the direct
supervision of the Max Technical Service Department. Unauthorized repair work may damage the meter and will void the
product warranty. Please make note of model and serial numbers on the flow meter before calling the factory. A return
goods authorization number will be issued if the flow meter has to be sent back for refurbishment.
Price and lead time for refurbishment will be provided upon request for quotation submitted online via:
https://www.maxmachinery.com/service-request
Max Machinery, Inc.
33A Healdsburg Ave
Healdsburg, CA 95448
Max Machinery, Inc. G-Series User Manual
1/4" NPT
3/8" NPT
3/8" NPT
3/8" x 1"
3/8" x 1.3"
1/2" x 2.1"
1/2" x 3.1"
1/2" x 4.7"
NOTES:
1:
Phone: 707-433-2662
www.maxmachinery.com
© Copyright 2018
Heater block for G015
(typical)
2.262
2.051
1.55
1.25
.749
.529
0
1/16" NPT
HEATER PORT CLEARANCE IS FOR A PROBE WITH 250 WATT/DENSITY MAX AT 400º F
Rev2018A
1/8" NPT
.1895±.0025
.376 ±.001
.1275±.0025
1/4" NPT (2 places)
13
Advertisement
Table of Contents
