Brother 888-X64 Operation Manual page 40

USINC A I TAC I tME NTS AND APPLICATIONS
Using the blind stitch foot
>
Zipag Stitch 0.7 (1/32)
3
Zipag Stitch
~
1.5 (1/ 16) 3.3 (3/16)
4
Zipag Stitch
~
2 (1/ 16) 5 (3/ 16)
Straight Stitch
9
...
3 (1 /8) (Center Needle I
Position)
I
Blind Hem
12
Stitch
~
2 (1/16) 5 (3/16)
<
Stretch Blind
14
Hem Stitch
j
2 (1/ 16) 5 (3/ 16)
This foot comes in handy not onl y for stretch bl ind hem
stitching, but also for sewing fabric edges and seams.
• When edge stitching
0
Turn off the machine.
A
Attach the blind stitch foot.
~
Turn on the machine.
A,
CAUTION
• Do
not turn on the machine while pressing
down the foot controller. The machine
may start unexpectedly and cause
personal injury or damage to the machine.
e
39
Position the needle the distance you want
the stitch to be from the
ed~e
of the fabric,
and then lower the needle m that position.
Turn the foot guide screw and carefully
adjust to guide the fabric.
<D
S crew
®
Guide
• When sewing seams
0
e
Turn off the machine.
Attach the blind stitch foot.
Turn on the machine.
A_cAUTION
• Do not turn on the machine while
pressing down the foot controller. The
machine may start unexpectedly and
cause personal injury or damage to the
machine.
e
Set the pattern selection dial to the
Straight Stitch (Center Needle Position).
Align the foot guide with the needle
position.
Set the pattern selection dial to the Zigzag
Stitch with the desired width.
Place the fabric under the foot so the foot
guide is aligned between both edges of the
fabric.
e
lower the presser foot and start sewing.
• When stretch blind hem stitching
W hen stretch bl ind hem stitchi ng using the b lind
stitch foot, turn the screw to adj ust the gu ide to the
folded hem.
• For more details on blind hem stitching, see
page 30.
~ 1
Screw
Guide
Folded hem