Brother 888-X64 Operation Manual page 3

• Do not use the machine near a heat
source, such as a stove or iron;
otherwise, the machine, power cord
or garment being sewn may ignite,
resulting in fire or an electric shock.
• Do not place this machine on an
unstable surface, such as an unsteady
or slanted table, otherwise the
machine may fall, resulting in
injuries.
6
Special care is required when
sewing:
• Always pay close attention to the
needle. Do not use bent or damaged
needles.
• Keep fingers away from all moving
f>C1rt5. Special care is required around
the machine needle.
• Do not turn on the machine while
pressing down the foot controller.
The machine may start unexpectedly
and cause personal injury or damage
to the machine.
•Switch the machine to the symbol
"O" position to turn it off when
making any adjustments in the needle
area.
• Do not use a damaged or incorrect
needle plate, as it could cause the
needle to break.
• Do not push or pull the fabric when
sewing, and follow careful instruction
when freehand stitching so that you
do not deflect the needfe and cause it
to break.
7
This machine is not a toy:
• Your close attention is necessary
when the machine is used by or near
children.
• The plastic bag that this machine was
supplied in should be kept out of the
reach of children or disposed of.
Never allow children to play with the
bag due to the danger of suffocation.
• Do not use outdoors.
8
For a longer service life:
• When storing this machine, avoid
direct sunligfit and high humidity
locations. Do not use or store the
machine near a space heater, iron,
halogen lamp, or other hot objects.
• Use only neutral soaps or detergents
to clean the case. Benzene, thinner,
and scouring powders can damage
the case and machine, and shoula
never be used.
•Always consult the operation manual
when replacing or installing any
assemblies, the presser feet, needle,
or other parts to assure correct
installation.
9
For repair or adjustment:
•If the light unit (light-emitting diode)
is damaged, it must be replaced by
authorized Brother Service Center.
• In the event a malfunction occurs or
adjustment is required, first follow the
troubleshooting table in the back of
the operation manual to inspect and
adjust the machine yourself. If the
problem persists, please consult your
local authorized Brother Service
Center.
Use this machine only for its intended
use as described in tti1s manual.
Use accessories recommended
by
the
manufacturer as contained in this manual.
The contents
of
this manual and
!p!!cifications of this product are
subject to change without notice.
For additional eroduct information,
visit our web site at www.brother.com
2