Overview Of Components; Eoc Controller - Triax 383101 User Manual

Overview of components

To install the EoC controller and endpoints it is recommended to use the following process:
Start with the controller
Use the controller interface to

configure the system as needed
or use the standard configuration
(see paragraph "8.
Controller interface")
Mount the controller

Attach cabling to controller

Using this process will allow for easier configuration of the endpoints, as the specific configuration groups
have already been set up and there is no need for individual setup of the endpoints, just choose the correct
configuration group and you are done.

EoC Controller

EN
Then install endpoints
Mount the backplate of the endpoint

Attach cabling to endpoint

Click in the inner box of the endpoint and

wait for the LEDs to show that the
endpoint is up and running
Log onto the setup WiFi

(TriaxSetup_xxxx)
Scan the QR code on the endpoint, to get

a link to the endpoint installation page
and open this in a browser
Choose the configuration group needed

for the endpoint and fill out the text fields
Attach the lid of the endpoint and you

are done.
4
Ethernet over COAX