Battery Replacement; Hibernation; Calibration; Water Damage - LogTag Recorders TRID30-7 User Manual

Hide thumbs Also See for TRID30-7:

Table of Contents

BATTERY REPLACEMENT

The TRID30-7F has a fixed battery and can't be replaced. Please note that your Logger does contain a

non-rechargeable Lithium Battery, which must be disposed of in accordance with local regulations.

The TRID30-7R battery can be replaced. The Loggers use a commonly available battery (CR2032); to

safeguard your data we recommend you use a reputable, branded battery.

Check the label on the back to find your model number.

The battery status can be found in the configuration screen. If you would like to know more about the

battery life of your Logger or how to replace your battery, please visit our website / knowledge base.

To prolong the life of your Logger you can hibernate your Logger between trips when it is not being used

for extended periods. Loggers can be hibernated via LogTag Analyzer by selecting 'Hibernate' from the

LogTag menu. When hibernated, all logging functions are suspended, all indicators are turned off and

internal components are switched to low power. This reduces the current consumption on Loggers to very

low levels.

Check our website for more information about the hibernation setting.

In order to calibrate your Logger, you need to use our LogTag Calibrate software. LogTag Recorders

releases our LogTag Calibrate software only to selected users who have suitable equipment and

credentials relating to standard practices of temperature and/or humidity calibration.

If you require calibration of your Logger(s), please contact your local supplier.

Please remember that none of the Loggers can be immersed into liquids. For more specific information,

check your user guide for the IP rating.

Keep the three metal contacts at the back of the Loggers clean and free from tape residue, dirt or other

contaminants, which could result in communications problems. If required, clean them with a soft pencil

eraser, but don't use abrasive materials as you may permanently damage them.

Table of Contents

Do you have a question about the TRID30-7 and is the answer not in the manual?