1. Setup And Configuration - LogTag Recorders TRID30-7 User Manual

Download and install LogTag Analyzer from our website:
www.logtagrecorders.com/software
Connect the Interface Cradle to your computer and insert the Logger into the Interface Cradle with the
label to the front. You will hear a click as the contacts engage.
Start LogTag Analyzer. In order to start using your Logger, you need to configure it via the 'LogTag Wizard'.
This can be accessed by pressing 'F2' on your keyboard or by clicking the 'Wizard' icon.
1. Description: Enter details to identify your Logger. E.g. refrigerator 3. Also the status of your battery is
indicated here.
2. Password: You have the option to specify a password, which needs to be entered the next time
someone configures the Logger or when the results will be downloaded.
3. Push button start or date/time start: You can start your Logger by pushing the start button or
automate the start by selecting a date/time when the Logger should start recording.
4. Enable pre-start logging: When you select this option the Logger will start recording immediately after
configuration. This is useful in case the user forgets to start the Logger.
5. Record readings so that...: Specify how long you wish to record for.

1. SETUP AND CONFIGURATION

1
2
3
5
6
7
8
4