2. Starting The Logger; 3. Download / Results - LogTag Recorders TRID30-7 User Manual

6. Record a reading every...: Choose the duration between each reading.
7. Begin recording after a delay of: Enter a start delay if required. A start delay commences upon
pressing the start button. This allows the Logger to reach the right temperature before recording starts.
This option wont be available with a date/time start.
8. Setting upper / lower alarm: Specify the upper temperature alarm and/or the lower temperature
alarm if you would like to trigger an alarm.
Optional; enable the audible alarm to alert nearby staff when an alarm has been triggered and an option
to set the temperature unit.
If the Logger has been configured with a Date/Time start, it will start automatically at the configured time.
For push-button start, when the display shows 'READY', press and hold the 'START/CLEAR/STOP'
button. Continue to hold while 'STARTING' flashes on the display and release the button when the flashing
stops.
The Logger will now display the delayed start time remaining (if configured). Once recording, the word
'RECORDING' will be shown on the display.
During recording, the display shows the temperature of the last reading taken, the current time, battery
status and a combination of alarm status and history.
A reading is taken and the display updated every logging interval as configured in LogTag Analyzer. When
you press the button, the next reading taken by the logger will be identified in the downloaded data with
an inspection mark.
Note: Have you forgotten to press the start button? A pre-start recording feature can be
activated, to make sure the Logger will monitor the temperature even before the trip has
started. No alarms are processed during pre-start logging.
1. Open LogTag Analyzer.
2. Insert the Logger into the Interface Cradle.
3. After a few seconds, the downloaded data will appear. Data can be displayed in
Chart-, Data-, Summary- or Day Summary formats by clicking the tabs at the bottom of the
chart dialog. Data can also be saved in a number of formats including TXT, PDF, HTML and
CSV for import.

2. STARTING THE LOGGER

3. DOWNLOAD / RESULTS