Mobi Technologies DualScan Prime 3 User Manual page 2

Low Battery symbol
Indicates low battery power
showing
Care & Cleaning
We recommend you inspect the probe tip for damage or dirt before every use and
clean it as follows
• If dirt, wax, or other debris is seen on the lens, gently wipe it clean with
a cotton swab or soft cloth lightly moistened with alcohol.
• Do not use the thermometer until any residual alcohol evaporates
• Do not use abrasive or stringent cleaners/ disinfectants
General Maintenance
WARNING: No modification of this equipment whatsoever is allowed!
• Mobi does not authorize any outside institution or individual to maintain
or repair this product. If you suspect the product is defective, please contact
Mobi via the contact information at the end of this manual.
• The user must not attempt any disassembly or repairs to the thermometer
• Opening of the thermometer by unauthorized agencies is not allowed
and will terminate the warranty.
Calibration- the thermometer is precisely calibrated at the time of manufactured. If
used accordingly to these instructions, periodic re-adjustment will not be required.
Storage
Do no leave the thermometer in sunlight (inside or outside of vehicle), in or near
any other high temperature if fire situation, any moist environment, or any place
which may cause impacts, shocks, or vibration to the unit.
Proper Disposal
Dispose of the device in accordance with rules and regulations applicable
at the place of operation. Dispose of at a public electronics collection
point. (EU countries -2002/96/EC WEEE Directive)
NORMALIZED SYMBOLS
Attention: see Instructions for use!
Software Version
This thermometer software version is Ver 3.0
Limited Product Warranty
MOBI® warrants its products to be free from defects in material and workmanship
for period of (90) days from the date of purchase. Should the product prove to be
defective at any time during the warranty period, we would either replace or repair
the product at our option without charge. After the warranty period, a service
charge will apply for replacement of parts and labor costs. To obtain warranty
service, you must return the product complete with its original parts & accessories
along with a copy of the original purchase, gift or registry receipt to us. This war-
ranty does not cover damage caused by any tampering, accident, misuse, abuse,
improper maintenance, unauthorized modification, or connection to an improper
power supply. There will be a charge for repair caused for such damage. This war-
ranty excludes all incidental or consequential damages and any liability other than
stated above.
6004116A306-01A 说明书.indd 2
Be ready to change
the battery soon
IP22
Mobi Technologies, Inc. declares that the DualScan™ Prime 3 Thermometer
(Item #70125) complies with the following standards
EN ISO 15223-1
EN 1041
EN 60601-1
EN30601-1-2
EN 12470-5
ASTM E 1965
EN 62304
EN ISO 10993-1
5
Questions?
Please visit: www.getmobi.com
Email: service@getmobi.com
Fax: 424-672-6628
7
The batteries and electronic instruments must be disposed
of in accordance with the locally applicable regulation, not
with domestic waste.
Complies with the European Medical Device Directive
(93/42/EEC), NotifiedBody is SGS United Kingdom Ltd.
Manufacturer information: Manufactured in China for:
Mobi Technologies, Inc.
IP code of the device: this device's grade of against ingress
of solid foreign objects -- ≥12.5mm diameter (and the
against access to hazardous parts with finger); the grade
of waterproof is dripping (150 tilted).
Batch code
STANDARD LIST
Medical device –symbols to be used with medical device labels,
labeling and information to be supplied –Part 1; General
requirements
Information supplied by the manufacturer with medical devices
Medical electrical equipment Part 1: General requirements for
basic safety and essential performance
Medical electrical equipment Part 1-2: General requirements
for basic safety and essential performance –Collateral standard:
Electromagnetic compability –Requirements and tests
Clinical thermometer-Part 5: Performance of infa-red ear
thermometers (with maximum device)
Standard Specification for Infrared Thermometer for Intermit-
tent Determination of Patient Temperature
Medical device software –Software life-cycle processes
Biological evaluation of medical devices-Part 1: Evaluation and
testing within a risk management process
© 2015 Mobi Technologies, Inc.
6
Mobi Technologies, Inc.
5913 Blackwelder Street
Culver City, CA 90232
All Rights Reserved
8
2015-2-27 10:39:38