ASSEMBLY
ASSEMBLY
Support Handle
1.
If necessary, position support
handle for comfortable
operation and securely tighten
screws.
Note: Label shows minimum
spacing for support handle location.
OPERATION
Moving parts can amputate fingers or cause severe injuries.
Keep hands, clothing and loose objects away from all openings.
Always stop engine, disconnect spark plug, and make sure all
moving parts have come to a complete stop before removing
obstructions, clearing debris, or servicing unit.
Operation of this equipment may create sparks that can start
fires around dry vegitation.This unit is equipped with a spark
arrestor to prevent discharge of hot particles from the engine.
Metal cutters can also create sparks if the cutter strikes rocks,
metal, or other hard objects. Contact local fire authorities for
laws or regulations regarding fire prevention requirements.
16
PE-2620/S
X7502350201
© 06/2018 ECHO Inc.