Connecting The Ac Adapter - Tadpole SPARCbook 3000ST User Manual

Connecting the AC Adapter
Getting Started
Connecting the AC Adapter
The AC adapter supplied with your SP ARCbook operates at any AC
voltage in the range of 100 to 240 Volts at 50 or 60Hz. This means that
you can use the supplied AC adapter anywhere in the world where there
is a suitable supply. You may need to use different AC cords, however.
Connect the AC adapter to your SP ARCbook as follows:
1.
Connect the DC cord from the AC adapter to the DC-In
connector on your SP ARCbook.
2.
Connect the AC cord from the AC adapter into a wall socket or
distribution panel.
Figure 1-2 Connecting the AC Adapter
SPARCbook Portable Workstation User Guide
1-5