Providing Power; Figure 3-2: Ac Adapter Connector - Tadpole COMET12 User Manual

Using COMET
Setting up

Providing power

22 COMET User's Guide
The COMET can operate from an AC power adapter or a
rechargeable Lithium-Ion battery.
Using an AC adapter
You may use AC power to operate the COMET. The bat-
tery need not be installed for AC operation.
To power the COMET from AC power:
1. Locate the COMET near an AC outlet.
2. Make sure the outlet is not controlled by a wall switch, which
can cause the notebook to be turned off accidentally.
WARNING: Use only the supplied AC adapter with the
COMET. Do not use an AC adapter designed for use with
another product.
3. Plug the connector from the AC adapter into the AC
Power Jack as shown in Figure 3-2. Then plug the AC
cable plug into a nearby AC outlet.
AC adapter

Figure 3-2: AC adapter connector

NOTE: The AC adapter can be plugged into a 100 - 240-Volt
source at 50 - 60 Hz. The AC adapter will automatically adjust
to the AC input voltage and frequency. The only requirement
is that the AC adapter/charger must correctly fit the AC outlet.