Table of Contents
Advertisement
Problem Solving and Support
Problem Solving Checklists
You have your SP ARCbook
configured to use NIS or NIS+
but restarted while no longer
Reset and restart your SP ARCbook as follows:
1.
Press
Pause-R.
connected to the network.
2.
When the OpenBoot welcome message is displayed, press
Pause-A.
The OpenBoot
ok
prompt is displayed.
This means your SP ARCbook is
looking for a name server to
3.
which it has no connection.
At the
ok
prompt, enter the following commands:
ok create no-resume?
ok boot -r
See "Configuring your SP ARCbook to use a name server" on
page 8-11.
Save and Resume problems
:) SPARCbook fails to Resume
The removable hard disk drive
Carry out a full system startup. See "Using Full System Startup" on
does not have usable Resume
page 1-8.
data in the save partition.
Removable hard disk drive is not
Check that removable hard disk drive is fitted.
If
not:
fitted.
SCSI ID conflict
1.
Press
Pause-A
to display OpenBoot prompt.
2.
Press
Pause-0
to power down.
3.
Fit the removable hard disk drive.
4.
Press power-on button.
SPARCbook 3 models: check that the removable hard disk drive has
a SCSI ID set to 3 and that no external drives use this ID. See
"Setting the SCSI ID for the RHDD" on page 6-7.
16-4
SPARCbook Portable Workstation User Guide
Advertisement
Table of Contents
