Dbscar Connector Registration - LAUNCH TECH X-431 PRO User Manual

LAUNCH
X-431 PRO User's Manual — Vehicle Diagnosis
More: To view software version and user's manual.
Click to search vehicle models.
Click to change the software theme.
Click next to "Select Diag Model" to select the corresponding connector.
While accessing other menus, click shown on the bottom of the screen to
extend the display window.
While browsing information, click or to zoom in or zoom out.

3.4.3 DBScar Connector registration

After successfully registering, click on the main menu screen, and click
"Management" to enter.
Click "DBScar Register" to enter the registration page. Input Serial No. and
password, and then click "Register" to complete registration.
Note: The serial No. and password can be obtained from the password envelope.
See Fig. 3-7.
Product SN
Product SN
Serial No. password
Fig. 3-7
After DBScar connector is successfully registered, a prompt message will
appear on the screen.
12