CMP PXSS2K Installation Instructions Manual

TECHNICAL DATA
CABLE GLAND TYPE : PXSS2K
INGRESS PROTECTION : IP66, IP67, IP68
PROCESS CONTROL SYSTEM : BS EN ISO 9001
: ISO/IEC 80079-34:2011
EXPLOSIVE ATMOSPHERES CLASSIFICATION
ATEX CERTIFICATION No : SIRA13ATEX1072X, SIRA13ATEX4078X
ATEX CERTIFICATION CODE : II 2 GD, II 1D, Ex d IIC Gb, Ex e IIC Gb, Ex ta IIIC Da
: II 3 G Ex nR IIC Gc, IM2 Ex d I Mb, Ex e I Mb
IECEx CERTIFICATION No : IECEx SIR.13.0027X
IECEx CERTIFICATION CODE : Ex d IIC Gb, Ex e IIC Gb, Ex nR IIC Gc, Ex ta IIIC Da, Ex d I Mb, Ex e I Mb
cCSAus CERTIFICATION No. : 2288626
cCSAus CERTIFICATION CODE : Class I, Groups A, B, C and D; Class II, Div. 2, Groups F and G; Class III, Div. 2; Type 4X; Oil Resistance II
: Class I, Zone 1 AEx d IIC Gb, AEx e IIC Gb, Class I, Zone 2 AEx nR IIC Gc, Class I, Zone 20 AEx ta IIIC Da
UL CERTIFICATION FILE : E201188B, E253914
UL CERTIFICATION CODE : Class I, Div 2, Groups A,B,C,D; Class II, Div 2, Groups F,G, Class I, Zone 1 AEx d IIC, AEx e II
(Code details depends upon application - please see certificate)
INSTALLATION INSTRUCTIONS
Installation should only be performed by a competent person using the correct tools. Read all instructions before beginning installation.
SPECIAL CONDITIONS FOR SAFE USE
1. According to the CEC wiring code, connectors with metric threads are only suitable for Areas Classified in ZONES unless fitted with an approvedMetric to NPT thread conversion adaptor.
2. Wiring method for type of cables that can be used in Class I, Div. 1, 2, and Class I, Zone 1, 2, Classified Areas according to 60079-14 installation wiring method restrictions.
3. Shipboard Cables are for use on Marine Platform or shipboards only and are subject to local authorities having jurisdiction on the installation.
4. CAUTION - To reduce the risk of flame propagation, fittings with ISO metric threads require:-
a) 5 full threads engaged for gas groups C and D
b) 10 full threads engaged for gas groups A and B
5. When the connector is supplied with metric entry threads, a CMP Entry Thread Washer should be fitted between the connector and the enclosure
to prevent the ingress of moisture or dust into the enclosure. Thread tape must not be applied to the threads.
6. Before installating the connector, ensure that the connector thread forms and the enclosure thread form are compatible.
ACCESSORIES
The following accessories are available from CMP Products, as optional extras, to assist with fixing, sealing and earthing :-
Locknut | Earth Tag | Serrated Washer | Entry Thread (I.P.) Sealing Washer | Shroud *
Available Entry Threads (Alternate Metric Thread
Lengths Available)
Number
of Cores
Standard Option
Cable
Gland
Size
Min Thread Thread
Metric Length NPT Length NPT Max
(Metric) (NPT)
20S/16 M20 15.0 1/2" 19.9 3/4" 11
20S M20 15.0 1/2" 19.9 3/4" 11
20 M20 15.0 1/2" 19.9 3/4" 11
25 M25 15.0 3/4" 20.2 1" 21
32 M32 15.0 1" 25.0 1 1/4" 38
40 M40 15.0 1 1/4" 25.6 1 1/2" 59
50S M50 15.0 1 1/2" 26.1 2" 89
50 M50 15.0 2" 26.9 2 1/2" 89
63S M63 15.0 2" 26.9 2 1/2" 115
63 M63 15.0 2 1/2" 39.9 3" 115
75S M75 15.0 2 1/2" 39.9 3" 140
75 M75 15.0 3" 41.5 3 1/2" 140
90 M90 24.0 3 1/2" 42.8 4" 200
100 M100 24.0 4" 44.0 5" 200
*Note : For material options please add the following suffix to change the Ordering Reference ; Brass (no suffix required), Nickel Plated Brass "5", 316 Grade Stainless Steel "4", Copper Free Aluminium "1"
For NPT options please add the following digits to the material suffix ; 1/2" = 31, 3/4" = 32, 1" = 33, 1 1/4" = 34, 1 1/2" = 35, 2" = 36, 2 1/2" = 37, 3" = 38, 3 1/2" = 39, 4" = 310 (Brass requires prefix "0")
Examples : 32PXSS2K1RA534 = Nickel Plated Brass 1-1/4" NPT, 50SPXSS2K1RA035 = Brass 1-1/2" NPT, 25PXSS2K1RA432 = Stainless Steel 3/4" NPT, 20PXSS2K1RA5 = Nickel Plated Brass M20
Dimensions are displayed in millimetres unless otherwise stated
CMP Products Limited on its sole responsibility declares that the equipment referred to herein conforms to the requirements of the ATEX Directive 2014/34/EU and the following standards:-
EN 60079-0:2012, EN 60079-1:2007, EN 60079-7:2007, EN 60079-15:2010, EN 60079-31:2009, BS 6121:1989, EN 62444:2013
David Willcock - Certification Engineer - (Authorised Person)
CMP Products Limited, Cramlington, NE23 1WH, UK
24th June 2015
0518
Notified Body: Sira Certification Service, Unit 6, Hawarden Industrial Park, Hawarden, CH5 3US, UK
www.cmp-products.com
Diameter Cable Combined Ordering
Overall Cable Across Across
Over Bedding
Diameter Flats Corners
Conductors Diameter (*Brass Metric)
Protrusion
Length
Max Max Min Max Max Max Size
8.6 8.6 3.1 8.6 30.0 33.0 53.1 20S16
11.7 11.7 6.1 11.7 30.0 33.0 53.1 20S
12.6 12.9 6.5 14.0 30.0 33.0 54.2 20
17.5 17.9 11.1 20.0 36.0 39.6 60.0 25
23.6 23.9 17.0 26.3 41.0 45.1 61.1 32
30.0 30.3 22.0 32.1 50.0 55.0 62.4 40
36.6 36.9 29.5 38.2 55.0 60.5 65.2 50S
41.0 41.3 35.6 44.0 60.0 66.0 67.6 50
47.9 48.4 40.1 49.9 70.1 77.1 71.1 63S
53.7 54.0 47.2 55.9 75.0 82.5 70.4 63
59.9 60.2 52.8 61.9 80.0 88.0 75.3 75S
64.3 64.2 59.1 67.9 85.0 93.5 74.9 75
75.3 75.6 66.6 79.4 108.0 118.8 94.8 90
85.6 85.9 76.0 90.9 123.0 135.3 86.3 100
Glasshouse Street • St. Peters • Newcastle upon Tyne • NE6 1BS
Tel: +44 191 265 7411 • Fax: +44 1670 715 646
E-Mail: customerservices@cmp-products.co.uk • Web: www.cmp-products.com
Date Printed:
INSTALLATION INSTRUCTIONS FOR
CMP CABLE GLAND TYPE PXSS2K
FOR TERMINATION OF UNARMOURED, BRAIDED CABLES AND EXTRA HARD CORD
USEAGE CABLES FOR USE IN HAZARDOUS LOCATIONS.
INCORPORATING EU DECLARATION OF CONFORMITY TO DIRECTIVE [2014/34/EU]
Reference
Cable
Gland
Shroud
Weight
(Kgs)
Ordering
Type
Suffix
PXSS2K 1RA PVC06 0.20
PXSS2K 1RA PVC06 0.20
PXSS2K 1RA PVC06 0.20
PXSS2K 1RA PVC09 0.33
PXSS2K 1RA PVC10 0.39
PXSS2K 1RA PVC13 0.56
PXSS2K 1RA PVC15 0.66
PXSS2K 1RA PVC18 0.73
PXSS2K 1RA PVC21 1.07
PXSS2K 1RA PVC23 1.06
PXSS2K 1RA PVC25 1.30
PXSS2K 1RA PVC27 1.30
PXSS2K 1RA PVC31 3.02
PXSS2K 1RA LSF33 4.00
SCAN FOR INSTALLATION VIDEOS
CABLE GLAND
TYPE PXSS2K
Logo's shown for illustration purposes only. Please check certification for details