Table of Contents
Advertisement
14
Attendant Control Joystick
For more information on this application, contact your Pride/Quantum Rehab Provider.
The Attendant Control is for use by an ambulatory attendant and has the following controls:
„ On/Off Button
Enables/disables power
„ Battery Condition Meter
Indicates battery charge
„ Actuator LEDs
Indicates actuators in use
„ Mode LED
Used for profile selection
„ Joystick
Controls speed and direction in Drive mode; selects actuators in Seat mode.
NOTE: When in use, the Attendant Control overrides hand control commands.
Lock Mode
This controller can have a feature enabled that allows you to "lock out" unauthorized users.
To lock the controller:
1. Press and hold both profile keys until the system shuts off.
2. The system is now locked.
NOTE: When the system is turned on and the system is locked, the battery condition meter and a
key will be on the screen. (See NE+ Error Codes.)
To unlock the controller:
1. Press the on/off key to turn on the controller. The battery condition meter and a key will be displayed
on the screen.
2. Move the joystick to the full forward position until the controller beeps.
3. Move the joystick to the full reverse position until the controller beeps.
4. Release the joystick. The controller is now unlocked.
Sleep Mode
The NE+ controller offers a sleep mode feature which will shut off the main power if the joystick remains
stationary for a programmed period of time from 0-240 minutes. To restore power and resume operation
of the chair, push the on/off key.
Thermal Rollback
The NE+ controller is equipped with a thermal rollback circuit which monitors the temperature of the
chair's motors and controller. If either exceeds the safe operating temperature, the controller reduces the
output to 20% of full operation level. This reduces the chair's speed and allows a cool down period. Once
the temperature returns to a safe level, the chair will resume normal operation.
Hide quick links:
Advertisement
Table of Contents
