Table of Contents
Advertisement
LCD Screen
The LCD screen provides the user with easily intuited feedback information such as battery condition,
key lock, actuator indicators, turn indicators, power chair speed, warnings, and error codes. See figure 1.
The brake, fault, warning, power base, and temperature warning indicators are only lit when the system
detects a condition that triggers them. If a warning indicator is displayed, the controller will also give an
audible beep.
The charging and lights indicators are lit steadily when the corresponding function is active. When these
1
indicators are flashing, they indicate the location of a problem. See Error Codes.
The turn indicators flash as the turn indicator lights are flashing. If there is a problem, the warning icon will
light and the turn indicator will flash at twice its normal rate.
1. Charging Indicator
2. Lights Indicator
3. Battery Condition Meter
4. Lock Out
5. Actuator Error Indicator
6. Motor Brake Fault Indicator
7. Drive Profile/Speed Indicator
Figure 1. LCD Screen
Drive Profile Selection
Your NE+ controller may be programmed for up to five drive profiles that allow the system to be custom
tailored to your environment. The drive profile may be changed by pressing the profile decrease key or
the profile increase key.
NOTE: Drive profiles are set by your Pride/Quantum Rehab Provider. Contact your Quantum Rehab
Provider to change or add a drive profile.
2
3
Identification Key
10
1
2
3
10
4
5
6
7
8. Fault Indicator
9. Warning Indicator
10. Left Turn Indicator
11
11. Temperature Warning Indicator
12. Attendant Control
13. Right Turn Indicator
4
5
6
7
11
9
8
12
13
8
9
12
13
11
Hide quick links:
Advertisement
Table of Contents
