Generac Power Systems MAGNUM MLT4060MVD Owner's Manual page 27

Event Log Screen
See Figure 2-21. The controller's event log (
a list of the last 15 recorded electrical trips or shutdown
events and the engine hours at which they occurred.
Once the log is full, any subsequent electrical trip or
shutdown alarm overwrites the oldest entry in the log.
Therefore, the log always contains the most recent
shutdown alarms.
Figure 2-21. Event Log Screen
To view the event log:
Press both ↑ and ↓ buttons simultaneously to
1.
display the navigation menu.
Cycle to the event log section and press the Auto
2.
button to enter.
Repeatedly press the ↑ or ↓ buttons until the LCD
3.
window displays the desired event.
Continuing to press down the ↑ or ↓ buttons will cycle
through past alarms. Eventually the most recent alarm
will display and the cycle begins again.
To exit the event log, press the ↑ and ↓ buttons
simultaneously to enter the navigation menu. Once
entered, cycle to the desired operator screen.
Owner's Manual for MLT4060MVD Light Tower
About Screen
) displays See Figure
information about the controller such as the controller's
date and time, the product and USB identification
number, and the application and engine version.
General Information
2-22. The About ( ) screen contains
Figure 2-22. About Screen
23