Alarm Input Setup - IC Realtime DVR-Flex4 Installation Manual

Alarm Input Setup

Alarm inputs are to be configured to send SMTP notification to I-View Now whenever an alarm event occurs. I-View Now
suggests recording on all camera channels whenever an alarm event is detected.

From the Main Setup Menu

Click the alarm Icon

Select event Type Local Alarm

Select Alarm In All

Check the Enable Box

Set Type Normal Open

Set anti-dither 5

Set Latch 5

Check Send Email

Check record channel

Check all Channels

Optionally check buzzer

Checking buzzer makes the DVR
Beep when an alarm input is fired
ICRealtime Flex4/8/16E Installation Guide rev 1.0
© 2013 I-View Now, LLC. All Rights Reserved.
Page 12