Omega MWTC SERIES User Manual page 29

3
Software
Manual Connect Receiver
Is available if you do not want TC Central to send "+++" to all of your serial
ports. If you know the COM port number used by your receiver, you can
connect to it from this menu without disturbing other COM ports. You can also
use this menu to connect to a second receiver connected to the PC on a different
COM port.
Configure Transmitter
Launches the UWTC Configuration Wizard. When you follow the steps in the
wizard, you will be able to configure each transmitter (one at a time) for the
thermocouple type, the transmitter address, and the sample rate.
3-19