Omega MWTC SERIES User Manual page 23

3
Software
Reset Axes will effectively cancel the results of a Data Zoom and return the axes
back to their original dimensions, but will not change the size of the chart.
Floating Cursor
When checked, will display a crosshair type cursor that you can move with the
mouse. You can use the Floating Cursor to pinpoint a particular temperature
and time. The status bar displays the data point number, the time, and the
temperature, where the crosshairs meet. If the horizontal cursor line is touching
a data plot line, the corresponding channel number is also displayed in the status
bar.
Tracking Cursor
When checked, will perform similarly to the Floating Cursor, except that you can
specify a channel for the horizontal cursor line to lock on to. This channel is also
displayed in the status bar. With this option enabled, you can move the mouse
left and right without regard to up and down, and the horizontal cursor will
remain pointing to the line (channel) you specify. Assuming you have more than
one channel plotted on the chart, you can switch tracking to another channel
by moving the mouse over the data line of that channel until the mouse cursor
becomes a hand with a pointing finger. If you left-click at this point, the Tracking
Cursor will track that line. You can also change the channel of the Tracking
Cursor from the chart's context menu, Tracking Cursor menu item combo box.
The same option is also available in the View Chart menu in the main menu bar
Line Options
Allows you to select which channel(s) you want to display, and/or change the
color of each channel data line. This allows you to limit your view to either a
single channel, or a selected two or more channels for comparison, instead of
having all twelve channels displayed at once.
3-13